Amaoe MAC10 CPU Reballing Stencil-Original For Apple Mackbook M2 / M2 Pro
Amaoe MAC10 CPU Reballing Stencil-Original For Apple Mackbook M2 / M2 Pro
Product Specification Table
| Specification Category | Details |
|---|---|
| Product Name | Amaoe MAC10 CPU Reballing Stencil – Original |
| Model / SKU | MAC10 |
| Brand | Amaoe |
| Stencil Category | CPU IC BGA Reballing Stencil |
| Primary Application | CPU reballing and solder paste application for Apple Silicon processors |
| Compatible CPUs | Apple MacBook M2 and M2 Pro CPUs |
| Target Devices | MacBook Air (M2), MacBook Pro (M2 / M2 Pro series) by Apple |
| Repair Level | Advanced chip-level motherboard repair |
| Stencil Type | Precision BGA stencil (CPU-specific pattern) |
| Material | High-quality stainless steel (heat-resistant, corrosion-resistant) |
| Manufacturing Process | High-precision laser / chemical etching |
| Standard Thickness | 0.12 mm (industry-standard for Apple Silicon CPU reballing) |
| Optional Thickness (Seller-dependent) | 0.10 mm or 0.15 mm |
| Aperture Shape | Square / rounded-square micro apertures |
| Aperture Purpose | Ensures uniform solder volume and correct ball height |
| Pad Alignment Accuracy | Micron-level precision aligned to Apple M2 / M2 Pro BGA layout |
| Recommended Solder Ball Size | Typically 0.30 mm – 0.40 mm (verify with board pad measurement) |
| Recommended Solder Alloy | SAC305 (Sn96.5 / Ag3.0 / Cu0.5) or equivalent Pb-free alloy |
| Flux Compatibility | No-clean flux, RMA flux, water-soluble flux |
| Surface Finish | Smooth matte / anti-glare finish for clean paste release |
| Flatness / Planarity | High planarity maintained to ensure full contact with CPU surface |
| Edge Treatment | Fully deburred edges to prevent IC or board damage |
| Stencil Dimensions | Sized to fully cover Apple M2 / M2 Pro CPU BGA footprint |
| Weight | Lightweight stainless sheet (approx. 5–15 g) |
| Reusability | Yes, reusable with correct cleaning and storage |
| Expected Lifespan | Dozens to hundreds of reball cycles under professional use |
| Cleaning Method | Isopropyl Alcohol (IPA), soft brush, ultrasonic cleaner |
| Operating Temperature | Room temperature during stencil use |
| Reflow Compatibility | Hot-air station, IR rework station, BGA rework machine |
| Included Items (Standard Pack) | 1 × Amaoe MAC10 CPU stencil |
| Optional Accessories | Alignment jig, magnetic base, positioning plate, blades (sold separately) |
| Packaging | Anti-static protective sleeve with outer carton |
| Storage Conditions | Flat, dry, dust-free environment (20–25 °C, <60% RH) |
| Handling Precautions | Handle by edges only; avoid bending and fingerprints |
| Compliance | RoHS-friendly; supports lead-free solder workflows |
| Country of Origin | China (Amaoe original manufacturing) |
| Warranty | Seller-dependent (manufacturing defects only) |
| Skill Level Required | Professional / advanced technician |
| Typical Use Cases | CPU no-power, boot failure, overheating, dead logic board |
| Quality Control | Factory-checked aperture accuracy and thickness consistency |
| Seller Notes | Confirm CPU package revision before use |
🔍 Technical Explanation & Practical Notes
1. Purpose of the MAC10 Stencil
The Amaoe MAC10 CPU Reballing Stencil is engineered specifically for Apple Silicon M2 and M2 Pro CPUs, which use high-density BGA packaging. These CPUs require extremely accurate solder ball placement to restore electrical integrity between the CPU and MacBook logic board during advanced repair.
2. Importance of Correct Thickness
A 0.12 mm thickness is widely preferred for Apple Silicon CPU reballing because it: Amaoe MAC10 CPU Reballing Stencil-Original For Apple Mackbook M2 / M2 Pro
-
Maintains stencil rigidity Amaoe MAC10 CPU Reballing Stencil-Original For Apple Mackbook M2 / M2 Pro
-
Delivers consistent solder volume Amaoe MAC10 CPU Reballing Stencil-Original For Apple Mackbook M2 / M2 Pro
-
Prevents collapsed or oversized solder balls after reflow Amaoe MAC10 CPU Reballing Stencil-Original For Apple Mackbook M2 / M2 Pro
3. Aperture Precision
Each aperture is etched to match the exact pad layout of M2/M2 Pro CPUs, ensuring:
-
Uniform solder ball height Amaoe MAC10 CPU Reballing Stencil-Original For Apple Mackbook M2 / M2 Pro
-
Amaoe MAC10 CPU Reballing Stencil-Original For Apple Mackbook M2 / M2 Pro Reduced risk of bridging or shorts
-
Higher first-pass reflow success rate Amaoe MAC10 CPU Reballing Stencil-Original For Apple Mackbook M2 / M2 Pro
4. Recommended Reballing Workflow
-
Remove old solder from CPU pads
-
Clean pads thoroughly with flux and wick
-
Align MAC10 stencil using a jig or magnetic base
-
Apply solder balls or paste evenly
-
Lift stencil vertically (no sliding)
-
Perform controlled reflow
-
Inspect under microscope
5. Cleaning & Maintenance
-
Clean immediately after use with IPA
-
Use ultrasonic cleaner for heavy flux residue
-
Avoid sharp tools that can damage apertures
Proper cleaning significantly extends stencil life.
6. Storage & Longevity
-
Store flat in anti-static sleeve
-
Avoid humidity and mechanical stress
-
Do not stack heavy tools on stencil
More Products : https://gaffarmarketdelhi.com
