Mobile Phone IC For MT6360P Original
MT6360P Technical Specifications Summary
The following table summarizes the original technical specifications and operational limits of the MT6360P IC.
| Feature / Parameter | Specifications |
| Manufacturer | MediaTek |
| Package Type | 103-WLCSP (Wafer Level Chip Scale Package) |
| Package Dimensions | 4.64 mm x 4.14 mm |
| Input Voltage (VIN) | 4.0V to 14.0V (Supports Fast Charging) |
| Max Output Current | 4.8A Continuous / 6.5A Peak |
| Number of Power Rails | Up to 12 (Buck Converters + LDOs) |
| Switching Frequency | 1.8 MHz (Typical) |
| Quiescent Current | < 5µA (In Sleep Mode) |
| Fast Charging Protocols | USB-PD 3.0, QC4.0+, SCP |
| Communication Interface | I²C (Inter-Integrated Circuit) |
| Operational Temp Range | -40°C to +85°C |
| Protection Features | OVP, UVP, OTP (Thermal), Short-Circuit Protection |
Key Functional Blocks
The MT6360P is more than just a power regulator; it is a multi-functional system-on-chip for power.
1. Intelligent Battery Charging
The IC features a switched-mode battery charger that integrates a synchronous PWM controller and power MOSFETs. It supports high-efficiency charging with high-precision voltage and current regulation. It is specifically optimized for single-cell Li-ion and Li-polymer batteries.
2. USB Type-C & Power Delivery (PD)
It includes a full USB Type-C transceiver with integrated termination resistors ($R_p$ and $R_d$). This allows the device to detect cable orientation and negotiate power profiles via the Power Delivery protocol, enabling high-wattage “Fast Charging.”
3. Voltage Regulation (Buck & LDO)
The IC contains two high-efficiency step-down (Buck) converters and six Low Dropout (LDO) regulators. These rails provide stable power to the smartphone’s most sensitive components, such as:
-
LPDDR RAM
-
Image Signal Processors (ISP)
-
Touch Screen Controllers
-
Sensors and Logic Gates
4. LED & Flash Drivers
It integrates dedicated drivers for system LEDs:
-
RGB LED Driver: 3-channel driver for notification lights (24mA/channel).
-
Flash LED Driver: Dual synchronous boost flash driver for camera flash and flashlight modes, supporting up to 400mA per channel.
Application and Device Compatibility
The MT6360P is a “staple” in the repair industry because it is a common failure point in devices that suffer from charging issues or “no power” symptoms. It is a pin-compatible part with several variants (like the MT6360RP or MT6360UP), though original factory specifications recommend using the exact suffix for best firmware compatibility.
